e 6
7. INITIALIZING G-RAID2
G-RAID2 is set up at the factory for use with
Mac OS X systems. If you are running Mac
OS X, G-RAID2 will mount on the desktop
right out of the box. If it becomes necessary
to re-format G-RAID2, follow the
instructions below.
• For Mac OS X installations, proceed to Section 7.1
• For Windows 2000/XP installations, proceed to Section 7.2
• For Cross-Platform use see section 7.3
7.1 Mac OS X
1. Open the Apple Disk Utility. The Apple Disk Utility is in
the Utilities Folder located in the Applications Folder on
the Macintosh HD. Select G-RAID2 by clicking on the entry
in the left-hand column as shown below. Information about
G-RAID2 will be displayed at the bottom.
3. Select the Partition tab to view the partition options as
shown below.
4. Set the Volume Scheme: to 1 Partition.
Enter a Volume Name under Volume Information
(in this example “G-RAID2”) and set Format to
Mac OS Extended as shown below.
Note: Alternatively, G-RAID2 can be set up in multiple volumes
by selecting the desired number of partitions from the Volume
Scheme pull-down menu.
2
To Next Page
Loading...
