G-Tek CYBORG 1000 TKL - Wireless 2.4 GHz Connection; Bluetooth Connection

Wireless 2.4GHz Connection
- Remove the Nano Dongle from the back of the keyboard and plug into
a USB port on your PC.
- Move the switch on the back of the keyboard to the position.
- Your keyboard is now ready to use.
Bluetooth Connection
- Move the switch on the back of the keyboard to the position.
- Press and hold the Fn + Q keys for 3 seconds to put the keyboard into
Bluetooth pairing mode.
- On your PC, search for and select Bluetooth name GA-CBKB87TRI.
- Your keyboard is now ready to use.