G-Tek CYBORG 3000 - User Manual

GA-CBKB104
G-TEK CYBORG 3000
MECHANICAL GAMING KEYBOARD
Manual

G-Tek CYBORG 3000 Specifications

General

Type	Mechanical
Backlighting	RGB
Anti-Ghosting	Full N-Key Rollover
Number of Keys	104
Connectivity	Wired
Programmable Keys	Yes

Summary

Connection

Connecting the Keyboard

Connect the keyboard cable to a PC USB port for plug-and-play operation.

Cable Management

Cable Routing Options

Utilize designated channels (Left, Central, Right) for optimal cable organization.

Installing the Cover

LED Light Controls

Adjusting LED Brightness

Use FN + '+' or ‘-‘ to increase or decrease LED light brightness.

Changing Light Wave Direction

Use FN + ↑/↓ or ←/→ to control light wave movement direction.

Customizing LED Lights

Recording and Saving Custom Patterns

Press FN+F12 to record, select keys F1-F5 for patterns, and save with FN+F12.

Toggling Custom Patterns

Switch between saved custom light patterns using FN + F1 to F5.

Preset LED Controls

Wave, Ripple, and Marquee Modes

Control wave direction (FN+F6), ripple effects (FN+F7), and marquee patterns (FN+F8).

Fading, Breathing, and Always On Modes

Activate fading (FN+F9), breathing (FN+F10), or keep lights on (FN+F11).

Factory Reset Function

Press and hold FN + PAUSE for 3 seconds to reset all settings to factory default.

Keyboard Specifications

Key Switch Specifications

Warranty Against Defects

Making a Warranty Claim

Steps to follow for a warranty claim, including contact information and process.