G-Tek CYBORG 3000 - Customizing LED Lights; Recording and Saving Custom Patterns; Toggling Custom Patterns

1. Press FN + F12.
The F1 to F5 keys will
start flashing which
indicates the keyboard
is ready to record a
custom pattern.
2. Select any key from
F1 to F5.
3. Next select the keys
you want to program
a light pattern to. For
example, press WSAD
keys then use the ‘LED
Light Controls’
instructions from this
manual to set your own
light pattern.
4. After you have finished
setting a light pattern,
press FN + F12 to save
the custom pattern.
5. The custom light
patterns can be toggled
by pressing FN + F1 to F5.
FN
F12
F2
F4
F1
F3
F5
CUSTOMIZING
THE LED LIGHTS