G-Tek CYBORG 3000 - Preset LED Controls; Wave, Ripple, and Marquee Modes; Fading, Breathing, and Always On Modes; Factory Reset Function

FN + F6 = Wave Mode: Press
FN + ↑↓←→ to change the
direction of the wave.
FN + F7 = Ripple Mode: When
pressing any key, the light will
spread out from that key in
multiple directions.
FN + F8 = Marquee Mode: The
lights will form an ‘S’ pattern from
ESC to CTRL (bottom left) keys.
FN + F9 = Fading Mode: When
pressing any key, the light will turn
on then slowly fade out.
FN + F10 = Breathing Mode: The
light fades in and out in a circular
motion.
FN + F11 = Lights Always On.
FN + PAUSE = Press and hold for
3 seconds to reset all settings to
Factory Default.
Pause
F11
F9
F7
F10
F8
F6
FN
PRESET LED
CONTROLS