44
CLEANING THE TANK
Before attempting to clean the tank, you must
deactivate the main switch, unplug the appliance,
and wait for the machine to cool down.
Do not immerse the appliance in water! It is absolutely
forbidden to service the inside parts of the machine.
The recovery tank (G) should be cleaned on a regular basis
to remove any fluid or contamination. Release the catches
(F) and lift the top part of the tank.
Debris should also be cleaned off the outside of the filter
(26) every time the lower part of the machine is cleaned
(Fig. 30).
CLEANING THE ACCESSORIES
Clean the accessories (extension hoses, multi-purpose brush,
nozzle, textiles tool) with running water. It is advisable to use
steam when cleaning the frames.
CLEANING THE HOSE
To clean the hose, follow the procedure below:
- Empty the recovery tank (G).
- Install the nozzle (19) to the hose.
- Fill a container with up to 3 litres of clean water.
Disinfectants may be added as long as they are foam-free.
- Pick up the water, using the nozzle (19).
- Empty the recovery tank (G) and repeat the operation as
necessary.
Fig. 30
26
To Next Page
Loading...
Need help?
General