b
Turn the dial (7) anticlockwise to open the steam/hot water dispenser
tap and press the hot water button (3) to start the pump.
After a few seconds, water will begin to flow out of the nozzle. Allow
C
about a cup of water to come out. Close the steam/hot water dispenser
tap and release the hot water button. The Tebe Gaggia is now ready for use.
d
Note: The temperature indicator (5) will turn on and off automatically
during the heating period. After turing on the machine, allow the indi-
cator to turn on and off at least 6 times before preparing the coffee (this corre-
sponds to a heating time of about 6 minutes).
Another feature of the machine is the “no-drip system”, eliminating most of
dripping from brewing head (16). After coffee brewing, however, a little drip-
ping may occur due to wet coffee grinds in the filter-holder.
17
To Next Page
Loading...
