L
Loretta SalazarSep 10, 2025
What to do if channel transmit level is too high or low on GAI-Tronics ICP9000?
To Next PageTo Next PageWhat to do if channel transmit level is too high or low on GAI-Tronics ICP9000?
General| Brand | GAI-Tronics |
|---|---|
| Model | ICP9000 |
| Category | Music Mixer |
| Language | English |
Details manual's content and related publications, including operator's manual.
Instructions for ordering parts, including contact information and required details.
Guidelines for returning equipment for repair and obtaining service.
Lists available kits and accessories for console installation and functionality.
Identifies required software for configuring the ICP9000 Navigator console.
Outlines environmental, physical, and audio performance parameters of the console.
Details frequencies and parameters for tone remote control functions.
Covers transmit audio parameters, FCC, and IC compliance information.
Explains the scheme and tones used for remote radio control.
Describes methods for remote radio control using DC currents and E&M leads.
Covers FCC warnings, required equipment, and mounting considerations.
Details safety, telephone line protection, and line connection considerations.
Procedures for setting receive and transmit audio levels for optimal performance.
Details MCU connectors, electrical interface, and PC communication setup.
Covers power supply, grounding, external accessories, and audio box connections.
Guides jumper placement on CSD slave boards for different configurations.
Overview of CARD Suite, its purpose, and system requirements.
Steps for connecting the console and installing the programming software.
Options for personalizing the operator interface and layout.
Overview of menu functions, file open, save, and exit procedures.
Configuration of operator profiles, toolbars, and feature access.
Error logging, options, diagnostics, and control button settings.
Procedure to access the console's internal diagnostic menus.
Settings for side tone volume, microphone selection, and printer error.
Access to advanced tests for hardware and communication troubleshooting.
Detailed explanation of audio loop, output, gain, and input level tests.
Overview of tests for supervisory, phone, DC, RS-232, I/O, E&M, and memory.
Adjusting alert/page tone levels and setting console security.
Definitions of boot-up error codes and option codes.
DTMF Decode, 16-Frequency Control, Paging Encode functionality.
Positive Mode Control, Secure operation, and printer logging capabilities.
Logging recorder output, DC control, E&M control, and Supervisory control.
Direct and External Full Duplex Phone Interface options and configurations.
25-Pair Telco Interface and MDC1200 STAT-ALERT Signaling.
RapidCall buttons, call alerts, radio checks, and transmission handling.
Overview of supported paging types: DTMF, 2-Tone, Plectron, 5/6-Tone.
Explanation and examples of 2-Tone paging format and capcode determination.
Configuration and examples for Plectron paging using code plans and frequencies.
Description and examples of 5/6-Tone paging, including EIA preamble and tone frequencies.
Lists potential issues and their corresponding solutions for system operation.
Identifies part numbers for common replacement components of the ICP9000.