short press
+
/ - to set the speed limit from 10 to 41km/h.
9) This feature is reserved: display P09, invalid.
10) This feature is reserved: display P10, invalid.
11) P11-assist sensitivity setting
:
short press
+
/ -to switch from 1 to 24.
12) P12-assist starting power setting:
short press
+
/ - to switch from 0 to 3.
13) P13-Assist magnetic disc types
short press
+
/ - to switch from 5->6->8->10->12 , different
numbers of magnets.
14)
P14-Current limit for the controller
:
short press
+
/ - to switch from 1 to 20A
15) This feature is reserved: display P15, invalid.
16) P16-Reset ODO distance
:long press
+
during 5 seconds.
17)
P17-The signal direction of the booster sensor
:
short press
+
/ - to switch from 0 to 1; 0:
Booster signal
;
1 Power signal
negative.