4)Assist level
Short press + or
-
to change assist level
，
default value is level 1
5) Head light control
Long press + for 3 seconds turn on/off the head light
。
6) 6km mode
When the bike is stopped, long press - , will enter 6km/h mode, the
speed will be 4.5~7.5km/h according to different road conditions,
“ ” will show up on screen, long press
-
again or short press
-，
will quit 6km/h mode. Long press or short press could be
customized by clients.
6. Parameter setting
When the display is powered on
，
long press +and
-，
will enter
parameter setting mode
，
in this mode, can change parameter
values
，
long press again +and
-
will quit parameter setting mode
or no operation during 10s will also quit this mode.
In parameter setting mode
，
short press +
/ -
will
change parameter value， short press M will save current
value and switch to next parameter.
1)
P01-back light lightness
：
To Next Page
Loading...