gala gar CUT 550 - User Manual

GAR CUT 550 (V. Profesional)
E
MANUAL TÉCNICO DE INSTRUCCIONES.
EQUIPOS PROFESIONALES DE CORTE POR PLASMA.
GB
TECHNICAL INSTRUCTIONS MANUAL.
PROFESSIONAL PLASMA CUTTING EQUIPMENT.
GAR CUT 550 230/400 V 50 Hz. Ref. 457.00.000
E
ESTE EQUIPO DEBE SER UTILIZADO POR PROFESIONALES.
EN BENEFICIO DE SU TRABAJO LEA ATENTAMENTE ESTE MANUAL.
GB
THIS EQUIPMENT MUST BE USED BY PROFESSIONALS.
TO HELP YOU IN YOUR WORK CAREFULLY READ THIS MANUAL.
Jaime Ferrán 19 50014 ZARAGOZA (Spain)
TLF.-34/976473410 FAX.-34/976472450
Ref. 45717147 / V3

Summary

CHAPTER 1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.

CHAPTER 2. TRANSPORT AND INSTALLATION.

2.1 ELECTRICAL INSTALLATION.

Details on the electrical installation requirements for the equipment.

2.2 PNEUMATIC INSTALLATION.

Requirements for the pneumatic installation and air supply.

CHAPTER 3. START-UP. ADJUSTMENT AND OPERATION CONTROLS.

3.1 OPERATION CONTROLS.

Identifies and explains the controls and indicators on the equipment's front panel.

3.2 START-UP PROCESS.

Step-by-step guide for starting up the plasma cutting equipment.

3.3 CUTTING PROCESS. GENERAL RECOMMENDATIONS.

Provides advice and best practices for performing plasma cutting operations.

3.4 CUTTING CYCLE CARRIED OUT BY THE GAR CUT (V. Industrial) EQUIPMENT.

Explains the cutting cycle and electronic plate adjustments.

3.5 RECOMMENDATIONS RESPECT TO CUTTING CYCLE.

Offers specific advice for optimizing the cutting cycle and torch longevity.

3.6 INTERNAL PROTECTION ELEMENTS.

Details the internal protection mechanisms safeguarding the equipment.

CHAPTER 4. MAINTENANCE OPERATIONS. RECOMMENDATIONS.

4.1 MACHINE MAINTENANCE. GENERAL RECOMMENDATIONS.

General guidelines for maintaining the plasma cutting machine.

4.2 MAINTENANCE OF THE PLASMA TORCH. GENERAL RECOMMENDATIONS.

Specific recommendations for maintaining the plasma cutting torch.

CHAPTER 5. ANOMALIES. PROBABLE CAUSES. POSSIBLE SOLUTIONS.

CHAPTER 6. SAFETY MEASURES.

ELECTROMAGNETIC COMPATIBILITY (CEM).

APPENDICES. ELECTRICAL DRAWINGS AND REFERENCE PART LISTS.

gala gar CUT 550 Specifications

General

Input Voltage	230 V
Input Frequency	50/60 Hz
Efficiency	85%
Insulation Class	F
Duty Cycle	60%
Protection Class	IP21