Why does my Galanz AUS-09C(H)53R130Dx Air Conditioner timer light up but not operate?
The timer is activated, and the unit is in ready mode. To resolve this, cancel the timer operation, and the unit should operate normally.
Why does the compressor stop intermittently in COOL or DRY mode, and the fan speed decreases on my Galanz AUS-09C(H)53R130Dx Air Conditioner?
To prevent the inside or outside air from freezing, the compressor may stop intermittently, or the fan speed of the indoor unit may decrease, depending on the inside and outside air temperatures.
Why do the indoor and outdoor fans stop intermittently in HEAT mode on my Galanz AUS-09C(H)53R130Dx?
In HEAT mode, the compressor operates in a reverse cycle to remove exterior ice. During this process, the indoor and outdoor fans may not operate intermittently for up to 20% of the total heat operation time.
Why does the compressor stop intermittently in DRY mode on my Galanz AUS-09C(H)53R130Dx?
In DRY mode, compressor operation is automatically controlled depending on the room temperature and humidity.
How to adjust fan speed in AUTO or DRY mode on Galanz Air Conditioner?
In DRY mode, the indoor fan speed is set to low. In AUTO mode, a fan speed of 3 steps is selected automatically.
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R410A |
| Noise Level (Indoor) | 36 dB(A) |
| Net Weight | 8.5 kg |
| Type | Split Air Conditioner |
Essential safety measures for air conditioner operation and maintenance.
Procedures for selecting area, mounting, wiring, and charging the unit.
Block diagrams, control specifications, and operation modes of the air conditioner.
Identifying and resolving common air conditioner issues using diagnostic functions and symptom analysis.
Step-by-step instructions for disassembling indoor and outdoor unit components.
Visual breakdowns and component lists for indoor and outdoor units across various models.
Electrical schematics for indoor and outdoor units, detailing connections for different models.
To Next Page
