What to do if my Galanz AUS-12H53R150P does not operate?
If your Galanz Air Conditioner isn't working, make sure of the following: * Check if the power plug is securely connected. * See if the circuit breaker or fuse has been tripped. * Ensure there are no obstacles interfering with the remote controller's signal.
What to do if my Galanz Air Conditioner is not cooling or heating well?
If your Galanz Air Conditioner isn't cooling or heating effectively, check these: * Ensure the temperature setting is appropriate. * Clean the air filters. * Make sure there are no obstructions blocking the indoor and outdoor unit's inlets and outlets.
What to do if my Galanz AUS-12H53R150P Air Conditioner remote controller is not working or displaying anything?
If the remote controller for your Galanz Air Conditioner isn't working or showing a display, check if the batteries are usable and properly positioned.
Why is my Galanz AUS-12H53R150P Air Conditioner leaking water from the outdoor unit?
Water leakage from the outdoor unit of your Galanz Air Conditioner can occur during heating or defrosting. This is due to melting water and water vapor running out, or water dropping from the heat exchanger during heating.
What does it mean if my Galanz AUS-12H53R150P makes clicking and bush sounds?
The clicking sound in your Galanz Air Conditioner is from the switching of the fan or compressor. The bush sound comes from the switch of refrigerant flowing inside the air conditioner.
Why does my Galanz AUS-12H53R150P make cracking sounds?
The cracking sounds in your Galanz Air Conditioner are caused by the expansion and contraction of the front grille due to temperature changes.
Why does my Galanz AUS-12H53R150P Air Conditioner make a sound of running water?
The sound of running water in your Galanz Air Conditioner is the sound of flowing refrigerant inside the unit or the sound of accumulated flowing water on the heat-exchanger.
What does it mean if my Galanz AUS-12H53R150P automatically resumes operation after a power failure?
If your Galanz Air Conditioner automatically restarts after a power failure, it means it has an auto-restart function, which is available on certain models.
What to do if operation does not start soon when I/O button is pressed after operation was stopped on Galanz AUS-12H53R150P Air Conditioner?
If the Galanz Air Conditioner doesn't start immediately after pressing the I/O button after it was stopped, please wait 3 minutes.
Why does my Galanz AUS-12H53R150P Air Conditioner not immediately blow out air at the start of HEAT mode?
When starting HEAT mode on your Galanz Air Conditioner, the unit needs time to prepare warm air. Please wait for the air to blow out.
Identifies key components of the indoor and outdoor units, including filters and panels.
Explains the meaning of various display indicators, lamps, and icons on the unit.
Details the location and function of the emergency operation switch for manual control.
Describes how to adjust the airflow direction using the horizontal louver blade.
Instructions for setting the timer to automatically turn the air conditioner on or off.
How to cancel previously set timer operations and return to normal mode.
Automatic adjustment of temperature and operation mode based on room conditions.
How to use the cooling function and adjust settings like fan speed and temperature.
Instructions for operating the air conditioner in dehumidification mode.
Details on using the fan-only mode without activating cooling or heating.
How to use the heating function and adjust settings like fan speed and temperature.
Explanation of the rapid cooling or heating function for quick temperature changes.
Describes the sleep mode for optimized comfort and energy saving during the night.
General| Type | Split System |
|---|---|
| Cooling Capacity | 12000 BTU/h |
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature Range (Cooling) | 18°C to 43°C |
To Next Page
