To Next PageTo Next Page
Need help?Do you have a question about the Galanz 18K and is the answer not in the manual?
General| Brand | Galanz |
|---|---|
| Model | 18K |
| Category | Air Conditioner |
| Language | English |
Covers power source, circuit, earthing, and wire handling precautions.
Avoids flammable gas, acidic environments, and direct airflow on people.
Ensures proper airflow and correct drainage to prevent unit damage.
Advises on proper disposal of electrical appliances as waste.
Warns against inserting objects into grilles and using flammable sprays.
Emphasizes powering off before cleaning and using appropriate materials.
Addresses auto-restart, abnormal operations, and when to contact service.
Clarifies installation, service by owner, and use by vulnerable individuals.
Identifies indoor unit parts, display panel, and signal receiver for different models.
Introduces the remote controller and its basic connection point.
Explains the operation and buttons of the remote controller.
Covers battery insertion, reset, signal range, and handling precautions.
Details starting/stopping, temperature, fan speed, sleep, airflow, and mode selection.
Describes the functionality of AUTO, COOL, DRY, FAN, and HEAT operating modes.
Explains sleep mode effects on temperature and fan speed in cooling and heating.
Guides on setting AUTO-ON/OFF timers and cancellation procedures.
Important notes regarding timer settings after power failure or changes.
Introduces the wire controller, its screen, and symbols.
Provides instructions for installing the wire controller.
Explains run/stop, temperature, fan speed, sleep, airflow, and mode selection via wire controller.
Details setting the date/time and various timer operations.
Explains how to activate and use the light wave function.
Guides on checking current faults, history, and sensor temperatures.
Covers checking and resetting unit parameters.
Details how to modify unit parameters and provides a parameter table.
Advises on cleaning filters and optimizing energy use for efficiency.
Recommends optimal temperature settings for cooling.
Step-by-step guide for cleaning the air filter and indoor unit.
Instructions for preparing the unit for long periods of non-use.
Criteria for choosing the best location for the indoor unit.
Criteria for choosing the best location for the outdoor unit.
Specifies limits for refrigerant pipe length, height difference, and bends.
Provides specific measurements for ceiling openings and hanging rings for different models.
Details how to design hanging structures for concrete ceilings and mounting.
Details how to design hanging structures for wooden ceilings and mounting.
Describes the process of hoisting and mounting the indoor unit using eyebolts.
Instructions for securely fixing the indoor unit and its panel.
Specifies how to position refrigerant and drain pipes.
Details the process for connecting refrigerant pipes with torque and angle standards.
Explains when and how to add refrigerant based on pipe length.
Covers inserting the drain pipe, its inclination, and insulation.
Guides on wiring the indoor unit and setting DIP switches for functions.
Details outdoor unit wiring and choosing correct power supply cables.
Steps for confirming installation and testing unit operation.
Procedure for testing the drain system's ability to remove water.
Lists faults indicated on the indoor unit's display and outdoor control board.
Details faults indicated on the wire controller and their causes/treatments.
Instructions for installing the throttle device and preventing condensate.
