EasyManua.ls Logo

Galanz 18K - SERVICE AND MAINTENANCE; Cleaning Procedures for Filters and Unit; Long-Term Storage and Preparation

Galanz 18K
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OFF
If you are not using the air conditioner for a long period of time.
Set the fan of the indoor unit going for 3 to 4 hours to dry out the inside
thoroughly.
Switch off the air conditioner and unplug it from the wall socket.
Clean the air filters and the indoor unit thoroughly.
Remove the batteries out of the remote controller and put away the remote
controller.
Cover the indoor and outdoor unit with shield to keep off the dust.
If you have not used the air conditioner for a long period
Check whether both the air inlet and outlet are blocked.
Check whether the drain pipe is blocked, or if there is twist or terminal lift-up.
Check whether the air filters are appropriately mounted.
SERVICE AND MAINTENANCE
16
Cleaning of the indoor unit
Wipe the indoor unit with a piece of dry , clean cloth.
All the cleaning and maintenance work shall be done by qualified person.
Before cleaning or servicing, be sure to stop the operation and turn off
the power supply.
Cleaning of the air filter and the indoor unit
1.Remove the air inlet grille and air filter.
2.
3.Dry the air filter in the shade, do not parch!
4.Place the air inlet grille and air filter as they were.
Remove all dust on the front grille and air filters with a vacuum cleaner or brush.
( If the dust does not come off easily, wash them with neutral detergent dissolved
in warm water below 45 .)
Cleaning of the air filter
Air filter
Air inlet grille

Related product manuals