Galanz 18K - OPERATION OF AIR CONDITIONER; Date;Time and Timer Settings; Light Wave Function Selection

OPERATION OF AIR CONDITIONER
12
Operation mode selection
116
6
When the unit is at standby state, press MODE button to change its operation modes
in the order of:
Cooling Dehumidifying Fan Heating Auto
Date/Time Setting
11
7
7
Timer Operation
11
8
8
At normal display page, press TIME button to set the AUTO-ON timer and
meanwhile the lamp illuminates, while press TIME button to set the
AUTO-OFF timer and meanwhile the lamp illuminates
At normal display page, press TIME button once to set the Date/Time and
meanwhile the beeper raises Bi sound once; press the TIME button again to
finish the setting and meanwhile the beeper raises Bi sound twice.
When setting the timers, press TIME or TIME to shift the setting items
between timer parameter and timer date/time.
When setting the timers, press UP or DOWN to change the values of
timer parameter and timer date/time.
Timer parameters:
00: Invalid timer setting; 01: Valid single-timer; 02: Valid circulated timer.
When setting the timers, press TIME button once to finish the timer setting, and
meanwhile the beeper raises Bi sound twice.
Light Wave function selection
119
9