OPERATION OF AIR CONDITIONER
11
OPERATION WITH WIRE CONTROLLER
Run/Stop
When ON/OFF button is pressed once, the unit starts and the green lamp illuminates.
Temperature Adjustment
Sleep Selection
Press SLEEP button once to start sleep function and press it again to stop sleep
function.
Once activating sleep function, the sleep indicator lamp will illuminate on the
LCD screen of the wire control, and the fan will run at low speed.
Fan Speed Adjustment
Press FAN SPEED button to change the fan speed of indoor unit in the order
of (the grey part is flashing):
11
1
2
2
3
3
14
4
Every press of UP button increases the setting temperature by 1 , every
press of DOWN button decreases the setting temperature by 1 .
¡° ¡±
¡°
The range of setting temperature is 18-31 .
When ON/OFF button is pressed again, the unit stops and the red lamp illuminates.
Low Medium High Auto
Air flow direction adjustment
115
5
Press SWING button to change the air flow directions of indoor unit in the order
of (the grey part is flashing):
Auto
Swing
Manual
Position 1
Manual
Position 2
Manual
Position 3
Manual
Position 4
Manual
Position 5
To Next Page
Loading...
