What to do if my Galanz AUS-12H53R150P vane appears not to close completely after operation terminates?
If the vane on your Galanz Air Conditioner doesn't fully close after operation stops, restart the air conditioner and then stop it again.
General| Type | Split System |
|---|---|
| Cooling Capacity | 12000 BTU/h |
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature Range (Cooling) | 18°C to 43°C |
Identifies key components of the indoor and outdoor units, including filters and panels.
Explains the meaning of various display indicators, lamps, and icons on the unit.
Details the location and function of the emergency operation switch for manual control.
Describes how to adjust the airflow direction using the horizontal louver blade.
Instructions for setting the timer to automatically turn the air conditioner on or off.
How to cancel previously set timer operations and return to normal mode.
Automatic adjustment of temperature and operation mode based on room conditions.
How to use the cooling function and adjust settings like fan speed and temperature.
Instructions for operating the air conditioner in dehumidification mode.
Details on using the fan-only mode without activating cooling or heating.
How to use the heating function and adjust settings like fan speed and temperature.
Explanation of the rapid cooling or heating function for quick temperature changes.
Describes the sleep mode for optimized comfort and energy saving during the night.
To Next Page
