What to do if my Galanz AUS-18H53R120C Air Conditioner does not operate?
If your Galanz Air Conditioner isn't working, make sure of the following: * Check if the power plug is securely connected. * See if the circuit breaker or fuse has been tripped. * Ensure there are no obstacles interfering with the remote controller's signal.
What to do if my Galanz AUS-18H53R120C Air Conditioner is not cooling or heating well?
If your Galanz Air Conditioner isn't cooling or heating effectively, check these: * Ensure the temperature setting is appropriate. * Clean the air filters. * Make sure there are no obstructions blocking the indoor and outdoor unit's inlets and outlets.
What to do if my Galanz Air Conditioner remote controller is not working or displaying anything?
If the remote controller for your Galanz Air Conditioner isn't working or showing a display, check if the batteries are usable and properly positioned.
Why is my Galanz Air Conditioner leaking water from the outdoor unit?
Water leakage from the outdoor unit of your Galanz Air Conditioner can occur during heating or defrosting. This is due to melting water and water vapor running out, or water dropping from the heat exchanger during heating.
What does it mean if my Galanz Air Conditioner makes clicking and bush sounds?
The clicking sound in your Galanz Air Conditioner is from the switching of the fan or compressor. The bush sound comes from the switch of refrigerant flowing inside the air conditioner.
Why does my Galanz AUS-18H53R120C make cracking sounds?
The cracking sounds in your Galanz Air Conditioner are caused by the expansion and contraction of the front grille due to temperature changes.
Why does my Galanz AUS-18H53R120C make a sound of running water?
The sound of running water in your Galanz Air Conditioner is the sound of flowing refrigerant inside the unit or the sound of accumulated flowing water on the heat-exchanger.
What does it mean if my Galanz AUS-18H53R120C Air Conditioner automatically resumes operation after a power failure?
If your Galanz Air Conditioner automatically restarts after a power failure, it means it has an auto-restart function, which is available on certain models.
What to do if operation does not start soon when I/O button is pressed after operation was stopped on Galanz AUS-18H53R120C?
If the Galanz Air Conditioner doesn't start immediately after pressing the I/O button after it was stopped, please wait 3 minutes.
Why does my Galanz Air Conditioner not immediately blow out air at the start of HEAT mode?
When starting HEAT mode on your Galanz Air Conditioner, the unit needs time to prepare warm air. Please wait for the air to blow out.
General| Brand | Galanz |
|---|---|
| Model | AUS-18H53R120C |
| Category | Air Conditioner |
| Language | English |
To Next Page
