Galanz GLF16US2E23 - Reversing the Door

REVERSING THE DOOR
REVERSING THE DOOR
5
You can choose to open your refrigerator by the right side or the left side.
To change the way of opening, please follow the instructions below.
Important safety warning: before doing so please unplug and
disconnect the appliance
In addition to the accessories packed, you will need:
Medium-sized cross screwdriver
Small screwdriver
A solid line
1. First, check to make sure the power is disconnected.
2. Open the upper door, and close the bottom door.
6. Pry off and remove the cover over the screw holes
on the left side of regrigerator housing. Attach
cover on the right side. Cover is force-fitted.
7. Push the machine slightly backward against the wall.
8. Disassemble the 2 fixed stands.
9. Disassemble the bottom hinge.
10. Assemble the bottom hinge on the other side of
the machine.
11. Assemble the stands.
12. Exchange the 2 bolts and fix them on the other side.
3. Remove the protective covers with a Phillips
screwdriver through the back side, and save the
protective covers.
4. Remove the 3 shelf-tapping screws, and save them.
5. Push the top hinge forward, remove the door and save it aside.