7 8
START USING YOUR MULTI-COOKER START USING YOUR MULTI-COOKER
START USING YOUR MULTI-COOKER
Select a recipe and use the following steps as a guide to
help you start cooking. For more specific cooking
instructions, please refer to your recipe.
USING SMART PROGRAM WITH AIR FRY LID USING SMART PROGRAM WITH GLASS LIDADVANCED FUNCTIONS
How to Use Air Fry, Grill & Roast
1. Connect the power cord to a 120V outlet. The cooker will enter
Standby mode.
2. Select your desired Smart Program, for example: Grill.
3. Customize the temperature: press the TEMP/TIME button and
when the temperature will flash in the LED display, turn the
TIME/TEMPERATURE knob to raise or lower the temperature,
as required.
4. Customize the time: press the TEMP/TIME button again and the
time will flash in the LED display. Turn the TIME/TEMPERATURE
knob to set the desired cooking time.
5. Press the knob or the START/STOP button to begin the cooking
process.
6. The display will show PRE while the multi-cooker preheats, with
the exception of the Air Fry program which displays the cook time
countdown immediately. The lid needs to be on the cooking pot
during pre-heating.
7. Remove the air fry lid and place ingredients in the cooking pot
when the pre-heating is done. Put the air fry lid in place again and
press the START/STOP button to begin the cooking.
START USING YOUR MULTI-COOKER
Select a recipe and use the following steps as a guide to
help you start cooking. For more specific cooking
instructions, please refer to your recipe.
The display will show the LOW or HIGH to corresponding
setting.
Note:
The default temperature setting for Slow Cook program is low.
How to Slow Cook
1. Place ingredients in the cooking pot.
2. Connect the power cord to a 120V outlet. The cooker will enter
Standby mode.
3. Press the TEMP/TIME button and when the temperature will flash
in the LED display, turn the TIME/TEMPERATURE knob to
toggle between Low and High cooking setting.
4. Press the START/STOP button to begin the cooking process.
The countdown will begin immediately.
Delayed Start
Delayed Start can be used with all Smart Programs with the exception
of Sauté, Grill and Warm. Use the following as a guideline for how to
use the Delayed Start program.
1. Select your desired Smart Program by pressing the button.
2. Turn the knob left or right to set the temperature
3. Press the TEMP/TIME button to toggle between time adjustment
and temperature adjustment mode, then turn the knob left or right
to set the time.
Note:
You will not be able to return to this screen without cancelling the program
entirely, so it is important to remember to input your cooking time before setting
the Delayed Start timer.
4. Press DELAY button to turn the setting on, The LED above the
button will light up.
5. Turn the knob left or right to set the time.
6. Press the START/STOP button and the Delayed Start countdown
will begin. The number displayed on the screen represents the
amount of time before your meal will start cooking.
Note:
Changes to the Delayed Start time may not be made once the timer has started.
To adjust the time, Long press Start/Stop to stop the program and enter your
new selections.
Temperature: Fahrenheit & Celsius
Press the TEMP/TIME button for 5 seconds to toggle between °F
and °C.
WARNING:
Cooking pot will be hot during and after
cooking. To avoid injury, Always use
heat-resistant pot-holders or oven mitts
when handling a hot cooking pot.
SMART PROGRAM OVERVIEW
Smart
Program
Grill
Default
Temp
Temp
Range
Default
Time
Time
Range
Slow Cook
Roast
High N/A 04:00
00:12
00:30-06:00
00:01-01:00
00:30-12:0008:00N/A
Sous Vide
Low
High
Low
350°F
180°C
410°F
210°C
355-410°F
180-210°C
00:45 00:10-03:00
250-410°F
120-210°C
04:00 00:10-24:00
00:08 00:05-02:00
100-185°F
43-85°C
135°F
58°C
00:30 00:05-01:00
250-410°F
120-210°C
400°F
205°C
00:25 00:10-01:00
265-410°F
130-210°C
360°F
185°C
N/A N/A
N/A
Steam
Rice
Sauté
Air Fry
N/A
N/A
N/A
Auto
Auto
To Next Page
Loading...