nce,
using
rom
ted
ore
e
e
n it is
at
e for
cturing
ng.
moke
Thank you for purc has ing a Galanz produc t. Pleas e read this manual c arefully for c orrec t us age and s afety,
and keep for future reference. For s ervice, s upport and warranty information, call 800- 562- 0738.
FPO
OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
©2019 Galanz Americas Limited Company
15
Auto Program: How to Cook 8 oz fish with
sensor.
For sensor cook function, you can select the type of food you
want to cook from the programs listed on the cooking label
located on the interior panel of the appliance.
Sensor Cook
3
Press the dial once to confirm and start
sensing and cooking.
2
Turn the dial to select food code ‘SC-2’
(Fish).
1
In standby mode, press the SENSOR
COOK once.
4
The appliance will start countdown after
detecting the moisture. Before
countdown, the food code will display.
Sensor Cook Food Chart (Auto Program)：
NOTE:
After cooking for a period of time, the system will detect whether
there is an error. If there is an error, for example, if there is a
sensor short circuit or open circuit, the system will stop
automatically with the display showing Er60. There will be sound
beeps until the STOP/CANCEL pad is pressed.
If there is no error, the system will judge corresponding cooking
time based on the steam generated by the food, after cooking
for a period of time, the countdown will display on the screen.
During sensor cooking program, if press STOP/CANCEL pad
once or open the door, the system will turn back to standby
mode.
If during the longest sensor time the oven cannot judge the
cooking time according to the steam produced by food in the
cavity, the cooking will auto-end.
CodeFood Weight Range
SC-2
SC-3
SC-4
SC-5
SC-6
SC-1
7-21 oz
7-21 oz
5-24 oz
5-16 oz
5-16 oz
8-24 ozCorn on the Cob
Fish
Fresh Vegetable
Ground Meat
Oatmeal
Rice
To Next Page
Loading...
