©2019 Galanz Americas Limited Company
OPERATION INSTRUCTIONS
Thank you for purc has ing a Galanz produc t. Pleas e read this manual c arefully for c orrec t us age and s afety,
and keep for future reference. For s ervice, s upport and warranty information, call 800- 562- 0738.
FPO
OPERATION INSTRUCTIONS
4
For sensor reheat function, you can select the type of food you
want to cook from the programs listed on the cooking label
located on the interior panel of the appliance.
Sensor Reheat
Auto Program: How to Reheat chili with sensor.
3
Press the dial once and start sensing
and cooking.
2
Turn the dial to select food code ‘SH-1’
(Chili).
1
In standby mode, press the SENSOR
REHEAT once.
NOTE:
After cooking for a period of time, the system will detect whether
there is an error. If there is an error, for example, if there is a
sensor short circuit or open circuit, the system will stop
automatically with the display showing Er60. There will be sound
beeps until the STOP/CANCEL pad is pressed.
If there is no error, the system will judge corresponding cooking
time based on the steam generated by the food, after cooking
for a period of time, the countdown will display on the screen.
During sensor cooking program, if press STOP/CANCEL pad
once or open the door, the system will turn back to standby
mode.
If during the longest sensor time the oven cannot judge the
cooking time according the steam produced by food in the
cavity, the cooking will auto-end.
Sensor Reheat Food Chart (Auto Program)：
CodeFood Weight Range
SH-2
SH-3
SH-4
SH-5
SH-6
SH-7
SH-1
7-24 oz
5-16 oz
5-16 oz
5-24 oz
5-24 oz
5-28 oz
5-24 oz
Frozen Entrée
Frozen Pizza
Chili
Pasta
Mac and Cheese
Mashed Potatoes
Rice
The appliance will start countdown after
detecting the moisture. Before
countdown, the food code will display.
16
To Next Page
Loading...
