CONTROL PANEL
CONTROL PANEL
FUNCTION BUTTONS & KNOBS
It will be a valid prompt sound when press the button.
AIR FRY Button
Quickly select the Air Fry program then select the desired time and
temperature.
LIGHT
It can be turned on and off during standby and during operation modes.
FUNCTION
This knob can be used to cycle through the selection menu.
TEMP/TIMER/ CLOCK
The temperature and time can be adjusted by turning this knob after the
selection of the cooking mode, which will with the blink temperature,
Turn the knob left or right to adjust the temperature.
The adjustment of the time can be switched to the function time mode
adjustment by pressing the knob. At this time, the function time flashes.
Pressing the knob repeatedly can switch the time repeatedly.
Time will adjust in increasements of +/30 seconds below 10 minutes,+/-1
minute for 10-30minutes,+/-5minutes for 30-99minutes.
START/CANCEL
Push START/CANCEL to start or stop a cooking program. Press and
hold the START/CANCEL button for 3 seconds to clear all settings and
return to standby.
7
NOTE
It is suggested to only use the appliance
for 40 minutes in a two hour period.
To Next Page
Loading...
Need help?
General
