User Manual Basic Operations
11
With External Audio / Hi-Fi System
To connect any external Audio Hi-Fi system, the receiver has been provided with two RCA connectors
at the back of the receiver marked with Audio L and R.
Connect an RCA stereo cable from the AUDIO L, R jacks on the back of the receiver to the LINE,
AUX, and SPARE OR EXTRA input jacks on your Hi-Fi System.
Note:
1) When using the digital audio system, connect the product and the digital audio system using an optical fiber
cable for audio.
2) Connecting your TV directly to the audio/video output of the product will assure a more vivid picture and
enhance your viewing enjoyment.
7.3 Connecting the Network
1. Connecting to the LAN:
Connect one end of the Ethernet cable to the product and the other end to the LAN router.
2. Connecting to the Wi-Fi (Wireless LAN):
You can connect the network via the Wi-Fi access point or DSL/cable modem.
a. Plug in the wireless USB dongle to the USB port.(Separate purchase required)
b. Set the options for the Wi-Fi.
1. Network Name (SSID): Select the network name of your Wi-Fi access point from the list.
2. Security Type (WEP): This product supports WEP 40/128bit ASCII and WEP 40/128bit HEX. The security
type of the Wi-Fi and the product shall be set the same.
3. Password: When using the security type, you must set the password. Enter the same password in the Wi-Fi
setting menu.
3. Connecting to the 3G network:
For connect the network via the 3G dongle, Plug in your 3G dongle to the USB port.
Note:
1) Make sure the distance between the Wi-Fi access point and the product is not too far away. This may lower the
quality of service.
2) It is recommended to purchase a wireless USB dongle distributed by RT3070, RT5370. Other products may not
function or respond.
3) It is recommended to purchase a 3G USB dongle distributed by
huaweiE1750 ,E1550 ,E367 ,E1752 ,E173 ,EC122 ,EC156, Other products may not function or respond.
4) We recommend the network connection over a direct LAN.
To Next Page
Loading...
Need help?
General
