Galaxy Aqua 4000 User Manual

IMPORTANT!
This Step-by-Step guide should be given to the customer
after installation and demonstration.
Aqua
44
000000
44
000000
Ii
S
&
Instantaneous Electric Shower
Installation Instructions
Technical Hotline
Telephone: 0844 372 7766 Fax: 0844 372 7767
Email: technical-services@applied-energy.com
9.00 am - 5.00 pm Monday to Friday
SERVICE POLICY
In the event of you needing to contact the Galaxy Technical Hotline, the following
procedure should be followed:-
1
If a service call is booked, you or a representative must be present
during the Engineers visit.
Before telephoning the Galaxy Technical Hotline you should ensure
that you have the model number, power rating, serial number and
date of purchase.
The Galaxy Technical Hotline will be able to inform you whether the
fault can be rectified by the provision of a replacement part or an on
site visit by a Qualified Service Engineer.
If the product is no longer covered by the Guarantee, a charge will
be made for the site visit and for any parts supplied.
A charge will be made where a call under the terms of the guarantee
has been booked and a failure was not product related, or an engineer
arrives and is not able to gain access.
2
3
4
5
01/2011

Galaxy Aqua 4000 Specifications

General

Category	Plumbing Product
Power Source	Electric
Type	Water Heater
Approvals	WRAS
Voltage	230 V
Safety Features	Pressure relief valve
Warranty	2 years

Summary

GENERAL ADVICE TO SHOWER UNIT USERS

Shower Unit Operation

INSTALLATION

Unit Mounting Procedure

Details on fixing the shower unit to the wall using provided plugs and screws.

Product Positioning Guide

PLUMBING CONNECTION

Preceding Plumbing Steps

Emphasizes completing plumbing connections before electrical wiring.

Inlet Water Supply Connection

Instructions for connecting the mains water supply using appropriate fittings and flushing the pipe.

Back Plate Inlet Options

ELECTRICAL CONNECTION

Electrical Specifications

Lists power ratings, MCB ratings, and required cable sizes based on kW rating and distance.

Wiring Connections

Details on connecting live, neutral, and earth cables to the unit's terminals.

Cable Clamp and Earthing

Instructions for securing the cable with a clamp and ensuring effective earth continuity.

FITTING THE COVER INTO POSITION

Knob Alignment

COMMISSIONING THE SHOWER

Pre-Commissioning Checks

Steps to isolate power, check water supply, and ensure no leaks before powering on.

Initial Power-Up

Instructions for switching on electrical supply and checking the 'Power' neon indicator.

Water Flow and Air Release

Power Setting Activation

OPERATING THE SHOWER

Power Selection

How to select power levels ('Cold', 'Low', 'High') using push buttons, which also activate water flow.

Temperature Adjustment

Using the temperature control knob to adjust water temperature by altering flow rate.

Decreasing Shower Temperature

Increasing water flow by turning the temperature knob anti-clockwise to decrease temperature.

OPERATING FEATURES

Auto Reset Neon Indicator

SHOWERHEAD CLEANING INSTRUCTIONS

GUARANTEE

Guarantee Terms and Conditions

Product Modification and Usage