Need help?Do you have a question about the Galaxy EPABX 308 and is the answer not in the manual?
General| Model | Galaxy EPABX 308 |
|---|---|
| Category | Intercom System |
| Number of Extensions | 8 |
| Caller ID | Yes |
| Call Transfer | Yes |
| Call Hold | Yes |
| Conference Call | Yes |
| Call Forwarding | Yes |
| Power Supply | 220V AC |
Dial 1# + Password (default 6336) to enter programming mode.
Use command '01 + 91' to reset the system to default settings.
Use command '01 + 91 + 6336' to program the system's default settings.
Configure system settings for specific models using codes like '01 + [Model Number]'.
Change the system password using '02 + New PSW + Repeat PSW'.
Configure CO line settings like outgoing/incoming access and ring duration.
Set extension class of service using '08 + Day COS + Night COS + Extn Nos'.
Configure flash timing, CLI, and global dialing using specific codes.
Program features like paging, ringing type, and denied dialing for extensions.
Configure system time, date, day, and auto/manual day/night mode.
Details on repair or replacement of defective products during the warranty period.
Conditions under which the warranty does not apply, including misuse or tampering.
To Next Page
