Need help?Do you have a question about the Galaxy Eternia 32 and is the answer not in the manual?
General| Brand | Galaxy |
|---|---|
| Model | Eternia 32 |
| Category | Intercom System |
| Language | English |
Establishes speech after dialing an extension and lifting the handset.
Displays the calling extension number on a CLI phone during incoming calls.
Automatically rings both extensions when the busy extension becomes free.
Allows answering a call from another ringing extension without moving.
Allows interrupting or joining a conversation on a busy extension with a warning tone.
Routes incoming calls from an extension to another specified extension.
Prevents an extension from receiving calls while allowing outgoing calls.
Automatically rings a security extension upon lifting the handset.
Pre-sets an extension to ring at a specific time.
Allows checking your own extension number and if it is ringing.
Enables a 3-party conference call between three extensions.
Allows transferring internal calls from one extension to another.
Allows consulting another extension while holding the current call.
Enables switching between two consulted extensions.
Secures features like Alarm, Call Forward, Hot Line, and DND using a password.
Sets the system's real-time clock, date, and day of the week.
Configures extension numbers to be 2, 3, or 4 digits.
Allows assigning custom extension numbers within specified ranges.
Sets sequential extension numbers for floors or blocks.
Configures multiple features with a single programming command.
Sets specific extensions as operators or enables dialing '9' for security.
Broadcasts messages via handset on the paging port.
Groups extensions for calling each other, useful when flat-to-flat calling is barred.
Restricts direct calling between extensions, except for security/operator/members.
Allows recording and broadcasting vendor arrival messages.
Accesses programming mode using a password.
Resets the system to its default factory settings.
Restores the system to its initial default configuration.
Configures the system for specific line capacities (8, 16, 24, 32, 64, 128 lines).
Assigns operator functions or security dialing prefixes.
Modifies the existing system password.
Configures various features like Hot Line, CLI, and Intercom calls simultaneously.
Configures extension-specific settings like flash timing and CLI.
Enables/disables features such as DND, Call Forward, Conference, and Barge-In for extensions.
Assigns extensions as First Operator, Second Operator, or Admin.
Allows recording and playing back system messages.
Sets system time, date, day, and voice message parameters.
Sets default 2, 3, or 4 digit extension numbering schemes.
Configures flexible extension numbering schemes.
Assigns custom 3-digit extension numbers.
Sets sequential 3-digit extension numbers.
Assigns custom 4-digit extension numbers.
Sets sequential 4-digit extension numbers.
Shortcut for transferring calls to another extension.
Shortcut to enable/disable Hot Line feature.
Shortcut to change the personal password.
Shortcut for setting an alarm on an extension.
Shortcut to enable/disable the Do Not Disturb feature.
Shortcut to activate Ring When Free feature.
Shortcut for the Call Pickup feature.
Shortcut for Call Parking function.
Shortcut for call flip-flop during consultation.
Shortcut for Barge-In feature with or without tone.
Shortcut to enable/disable Call Forward.
Shortcut for initiating a Call Conference.
Shortcut for Paging or Announcement feature.
Shortcut for checking own extension number and ringing status.
Shortcut for checking port and extension numbers.
Details the terms, conditions, and exclusions for product warranty.
To Next Page
