EasyManua.ls Logo

Gallagher B11 - User Manual

Gallagher B11
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1.5V
D
1.5V
D
1.5V
D
1.5V
D
1.5V
D
1.5V
D
1.5V
D
1.5V
D
!
WARNING
Remove Internal Batteries
before connecting
12V External Battery
Hook B11 onto Treadin or Fence Wire.
Connect Earth Lead to Earth Peg.
Connect Fence Lead to Reel or Fence Wire.
Connect
Battery Leads
6 x 1.5V "D" CELL INTERNAL BATTERIES
12V EXTERNAL BATTERY
Red
Red
Green
Green
Red
Black
Joint Clamp
1. 3.
4.
2.
G353
B11
5.
Switch
ON
3C4370-11/00
3.
Switch
ON
1. Switch location
2. Switch settings
Night Save Mode
Day Save Mode
PRE-SET
TO CHANGE
BATTERY SAVE
MODE
BLACK
RED
2.
1.
B11
Question and Answer IconNeed help?

Do you have a question about the Gallagher B11 and is the answer not in the manual?

Gallagher B11 Specifications

General IconGeneral
BrandGallagher
ModelB11
CategoryPower Supply
LanguageEnglish

Summary

B11 Internal Battery Setup

Internal Battery Installation and Connections

Guide to inserting D-cell batteries and connecting leads for B11 operation.

Connecting to Fence and Earth Leads

Instructions for connecting the device to fence wire and earth peg.

Powering On the Device

Steps to switch the B11 unit on after internal battery setup.

12 V External Battery Connection

External Battery Setup Precautions

Important warnings and lead connection steps for 12V external battery use.

Connecting to External Power Source

Diagram showing how to connect the 12V battery to the B11 unit.

Device Operation with External Battery

Instructions for switching on the unit when using external power.

Battery Save Mode Configuration

Locating the Battery Save Mode Switch

Identifies the physical location of the switch for battery save modes.

Selecting Battery Save Mode Settings

Details on choosing between Night and Day Save Modes.

B11 Stand Assembly and Setup

Stand Attachment Preparation

Instructions for punching holes to attach the stand to the B11 unit.

Assembling Stand Components

Guide to assembling the handle, cap, nut, and washer for the stand.

Connecting to Fence and Earth

Steps for connecting the stand-mounted B11 to fence wire and earth.

Powering On with Stand Setup

Instructions for switching on the B11 unit after stand installation.

Related product manuals