11
English
CHOOSING AN INSTALLATION LOCATION
To get the best use of your Fence Monitor, it is wise to make a map
of your farm and mark the loca ons of your Fence Monitors and the
associated zones.
To help iden fy where faults are, the Fence Monitors must be
installed in sec ons of the fence that supply current to diff erent
parts of the farm. The Fence Monitor can only iden fy faults in
fences that are supplied through the installa on loca on. For best
results, Fence Monitors should be installed at specifi c feeder wires
that power specifi c geographical loca ons on the farm. See the
following examples:
Small Farm
Zone 1
Zone 2
To Next Page
Loading...
