Gallagher M10 - Step 3. Connect the Fence

12
Gallagher 3E3958 110V Energizer User Manual
Step 3. Connect the fence
Connect the energizer’s red (FENCE) terminal to the fence using double
insulated cable. Remove 2” of plas c coa ng from one end of the cable.
Bend the end of the wire to form a loop. Unscrew the red (FENCE)
terminal and insert the loop of wire between the washers. Screw the
terminal closed, ensuring the wire is fi rmly clamped. A ach the other end
of the cable to the fence using a joint clamp.
Red
Green
To fence
To ground