What to do if Gallagher Power Supply shows ( - - ) and has no output?
If your Gallagher Power Supply display shows ( - - ) and there's no output, it's likely in standby mode. To exit standby mode, simply press the standby button on the controller.
Why is the Gallagher M1200i energizer output voltage low?
A low output voltage in your Gallagher Power Supply energizer often indicates a fault on the fence. Try removing any excess grass growth or short circuits on the fence to resolve this.
What to do if Gallagher M1200i Power Supply displays Error 20 - 29?
If your Gallagher Power Supply displays Error 20-29, it indicates an internal energizer fault. First, turn the energizer off for 30 seconds, then turn it back on. If the error persists, it needs servicing. Return the energizer to your Gallagher dealer.
What to do if Gallagher M1200i Power Supply earth voltage is too high?
If the earth voltage of your Gallagher Power Supply is too high, it suggests that the earth system is inadequate. Check the connections to the earth system and consider adding extra earth stakes.
Why Gallagher M1200i energizer started to run slowly?
If your Gallagher Power Supply energizer has started to run slowly, the internal temperature of the energizer may be too high. Mount the energizer in a cool area, out of direct sun, and with adequate ventilation.
What to do if Gallagher M1200i Power Supply displaying Error 11?
If your Gallagher Power Supply is displaying Error 11, it means the mains voltage is too high. Have your power supply checked by a professional electrician.
What to do if Gallagher M1200i Power Supply displaying Error 12?
If your Gallagher Power Supply displays Error 12, it indicates that the mains voltage is too low. Have your power supply checked by a professional electrician.
General| Brand | Gallagher |
|---|---|
| Model | M1200i |
| Category | Power Supply |
| Language | English |
Covers crucial safety advice for operating and interacting with the electric fence and energizer.
Specifies minimum required clearances from overhead power lines for electric fence installations.
Details additional safety measures, including fence wiring, warning signs, and ancillary equipment.
Explains requirements and precautions for servicing double-insulated controllers.
Explains the process by which the energizer sends electrical pulses to the fence.
Provides practical advice on fence checking, maintenance, and material selection for optimal performance.
Instructions for mounting the energizer controller unit.
Step-by-step guide for physically installing the main energizer unit.
Details on installing the primary earth stakes and connecting the earth cable.
Instructions for installing an additional stake to measure earth system performance.
Steps for connecting the energizer's output to the electric fence.
Instructions on plugging in the energizer and verifying it is powered on.
Identifies and explains the key components and terminals on the M1200i energizer unit.
Explains the controller's display elements, bargraph, and control buttons.
Details on interpreting output current and voltage readings from the controller.
Explanation of zone indicators, navigation buttons, and their usage.
Information on using the standby button and settings buttons for adjustments.
Description of various icons that may appear on the controller display.
Describes how the controller displays energizer voltage and indicates alarms.
Guidance on adjusting alarm levels for energizer and earth system performance.
Practical steps for testing the effectiveness of the earth system.
Instructions on how to adjust the energizer's output voltage.
Details on the Gallagher Alarm Kit for monitoring fence zones and generating alerts.
Information about the SMS Controller for remote monitoring and control via mobile phone.
Lists common problems, their causes, and recommended solutions for the energizer.
To Next Page
