What to do if Gallagher M6000i has no output and displays ( - - )?
If your Gallagher Power Supply shows ( - - ) and has no output, it is probably in standby mode. To exit standby mode, press the standby button on the controller.
What to do if Gallagher M6000i Power Supply output voltage is low?
If the Gallagher Power Supply's output voltage is low, it's likely due to a fault on the fence. To resolve this, remove any excess grass growth or short circuits affecting the fence.
Why is the earth voltage too high on my Gallagher M6000i?
If the earth voltage of your Gallagher Power Supply is too high, the earth system is likely inadequate. Check the connections to the earth system and add extra earth stakes to improve grounding.
How to fix a Gallagher M6000i Power Supply that is running slowly?
If your Gallagher Power Supply has started to run slowly, it's likely because the internal temperature is too high. Mount the energizer in a cool area, ensuring it's out of direct sunlight and has adequate ventilation.
What to do if my Gallagher M6000i Power Supply is displaying Error 14 - 19?
If your Gallagher Power Supply is displaying Error 14 - 19, this indicates an internal energizer fault. Turn the energizer off for 30 seconds, then turn it back on. If the error persists, return the energizer to your Gallagher dealer for servicing.
What does Error 21 mean on my Gallagher M6000i?
If your Gallagher Power Supply is displaying Error 21, this indicates a dead zone. Check that the zone device is properly connected and functioning correctly.
General| Brand | Gallagher |
|---|---|
| Model | M6000i |
| Category | Power Supply |
| Language | English |
To Next Page
