Gallagher M6000i User Manual

English
Gallagher 3E5260 M6000i/M12000i Energizer User Manual
15
Using The Energizer Controller
Energizer Output and Alarms
The energizer output is the default screen display mode. The zone indicator arrow
is highlighng the energizer zone ( ) and the energizer output voltage is 7.3KV in
this case.
The quickscan bargraph display is also indicang an output voltage of over 7KV.
Controller showing the energizer operang normally
Voltage Alarm
If the energizer output voltage falls below the alarm level (default 3KV) then the
status LED will ash red and the energizer zone indicator will become highlighted.
Controller showing the energizer in output alarm
Status LED
ashes red

Gallagher M6000i Specifications

General

Brand	Gallagher
Model	M6000i
Category	Power Supply
Language	English