-21-
(Operation CONT’D)
Siren Mode
Selected:
Speaker
Output:
By Default, Activating the Green Auxiliary
Wire Changes the Speaker Output to:
WAIL Wail Air Horn
YELP Yelp Air Horn
PHSR Phaser Air Horn
HF
(Hands
Free)
No Output
Steps through from Standby to Wail to Yelp
to Phaser then repeats.
Radio No Output Air Horn
NONE No Output Air Horn
(NOTE: PHASER and TWO-TONE may be optionally swapped
or disabled via program jumpers.
See INSTALLER-SELECTABLE OPTIONS on pages 3-6.)
Siren Mode
Selected:
Speaker
Output:
Pressing the Manual Push button
Changes the Speaker Output to:
WAIL Wail Yelp
YELP Yelp Phaser
PHSR Phaser Two-Tone
HF
(Hands Free)
No Output
Creates a manual WAIL tone while button is
being held that stops immediately when the
button is released.
Radio No Output
No Output
NONE No Output
Creates a manual WAIL tone while button is
being held that sweeps down when the
button is released.
The auxiliary wire may be optionally selected to duplicate the function of the
Manual push button instead of the Horn.
See INSTALLER-SELECTABLE OPTIONS on pages 3-6.)
To Next Page
Loading...
