To Next PageTo Next PageWhy is my Galmet SGW(S) Maxi 250 Water Heater relief valve leaking?
A Galmet Water Heater relief valve might leak because the faying surface is contaminated or damaged. Try to clean or lap the faying surface of the relief valve. Another reason could be that the water pressure is too high; in that case, use a pressure regulator.
What to do if DHW water is dirty in Galmet SGW(S) Maxi 250?
If the DHW water is dirty, it might be due to a build-up of deposits in the tank, or the magnesium anode may be used up. Clean the tank of any deposits, or replace the magnesium anode (not covered by the warranty).
How to fix a seized relief valve on a Galmet Water Heater?
If the relief valve on your Galmet Water Heater doesn't open, even when you try to blow through it, it may be seized. Clean or replace the valve.
Crucial points for installation and operation safety and best practices.
Lists the benefits and superior qualities of the titanium anode system.
Guides users through resolving issues related to the titanium anode system.
Detailed technical data for SGW(S) Maxi water heaters, capacities 250 to 500 liters.
Schematic diagrams illustrating dimensions for SGW(S) Maxi water heaters, capacities 250 to 500 liters.
Detailed technical data for SGW(S) Maxi water heaters, capacities 700 and 1000 liters.
Schematic diagrams illustrating dimensions for SGW(S) Maxi water heaters, capacities 700 and 1000 liters.
Technical data tables for SGW(S) Maxi Plus water heaters, capacities 300 to 500 liters.
Schematic diagrams illustrating dimensions for SGW(S) Maxi Plus water heaters, capacities 300 to 500 liters.
Technical data tables for SGW(S)M water heaters, capacities 300 to 500 liters.
Schematic diagrams illustrating dimensions for SGW(S)M water heaters, capacities 300 to 500 liters.
Product fiche details for the SGW(S) Maxi series water heaters.
Product fiche details for the SGW(S) Maxi Plus series water heaters.
Product fiche details for the SGW(S)M series water heaters.
General| Capacity | 250 liters |
|---|---|
| Mounting | Vertical |
| Voltage | 230 V |
| Thermal Insulation | Polyurethane foam |
| Protection Class | IP 24 |
| Power | 2.0 kW |
