To Next PageTo Next Page
Need help?Do you have a question about the Gamatronic POWER Plus Premium SA 15 and is the answer not in the manual?
General| Apparent Power | 15 kVA |
|---|---|
| Real Power | 13.5 kW |
| Communication Interface | RS232, USB, SNMP (Optional) |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
Guidelines for safe operation and maintenance of the UPS system.
Prohibitions to prevent damage to the UPS and ensure safety.
Overview of the main sub-assemblies of the POWER+ PREMIUM SA 15 UPS.
Describes the standard operating state where the load receives stabilized power from the inverters.
Explains the mode when the UPS draws power from batteries due to AC input failure.
Details the mode where the load receives power directly from the AC input via the static switch.
Details the LCD display, buttons, and LED indicators for operating the UPS.
Explains the various data screens and messages displayed on the UPS control panel.
Step-by-step guide for starting up the POWER+ SA UPS system.
Procedures for safely shutting down the POWER+ SA UPS system.
Information on how to determine the nature of UPS alarms and events.
Instructions on accessing and viewing active alarms, log entries, and resetting the log.
Details the UPS's scheduled automatic battery testing procedure.
Instructions for performing a manual battery test on the UPS.
Wiring instructions for UPS without a manual bypass switch.
Wiring instructions for UPS with a manual bypass switch.
Steps for installing and performing the initial start-up of the UPS, including power-on and configuration.
Detailed steps for setting the UPS system clock and date for accurate event logging.
Procedure to adjust the display screen contrast level for better readability.
Guide to changing the UPS's nominal output voltage to match load requirements.
Instructions for fine-tuning individual phase output voltages for precise control.
How to check if the automatic restart feature is enabled or disabled on the UPS.
Steps to enable or disable the automatic restart function for unattended power restoration.
Methods for manually switching the UPS between bypass and inverter modes for maintenance or load transfer.
Steps to diagnose issues when alarms are active, directing users to event logs.
Addresses situations where the UPS stays in battery mode after power restoration, checking circuit breakers.
Explains how to resolve issues after a failed battery test, suggesting waiting and performing a manual test.
Guidance for situations where the UPS is stuck in bypass mode, referring to manual control.
How to troubleshoot synchronization issues between input and inverter, checking phase sequence and frequency.
