Connecting Wires
Identify the blue and the white wires
extending from the timer unit. Attach the
blue wire to the copper lead of the motor
(either end) and then attach the white
wire to another copper lead of the motor.
Reversing the attachment of wires only
changes the spinning direction and it
does not cause damage to the unit.
Attaching Battery
This digital timer fits 6 Volt or 12 Volt
batteries. If using a 6V motor, use a 6V
battery. If using a 12V motor, use a 12V
battery. Connect the red wire to the
positive terminal (+) on the battery and
the black wire to the negative terminal (-)
To Next Page
Loading...