2
INSTRUCTIONS
INCLUDES: Wireless Speaker & Light Show, USB cable and manual
WARNING
SEIZURES - People with photosensitive epilepsy can have seizures triggered by ickering or ashing
lights such as strobe or disco lights.
Do not operate the product in water while the unit is plugged in. Serious and/or fatal injury may
result.
KEEP OUT OF REACH OF CHILDREN. THIS IS NOT INTENDED AS A TOY.
NOTE
• The product projects light show approximately 10-15 feet in diameter.
• Light show intensity will vary based on the color, size and depth of your pool.
• The hanger is designed to hang the product only. Do not hang any items from the product.
• For optimal performance, do not submerse unit in water over 1 foot as water pressure could damage the
speaker and/or sound quality.
GETTING STARTED
IMPORTANT: Before rst use, the battery must be fully charged. When fully charged, the red halo light
on the top lid of the speaker will turn o.
1. Plug the charge cable into your computer’s USB port or any standard 5V 1A or 2A USB wall adapter.
WARNING: Use the supplied USB cable. DO NOT substitute with any other cable.
2. Remove the charging port plug on top of the speaker and plug the cable into the port
(the halo light will turn solid red while charging).
3. When the charge is nished, the halo light turns o, unplug the charge cable from the charging port.
4. Replace the charging port plug, pressing it rmly into place so water does not seep into the port.
NOTE: When the battery is low, the halo light will ash red repeatedly. Recharge the product.
To Next Page
Loading...