GameFactor MG300 - Assembly and Installation; Monitor Stand Assembly; Connecting Video Cables; Power Connection and Operation

ENGLISH
Number Name
1 Menu buon
2 Navigation / down buon
3 Navigation / up buon
4 AUTO buon
5 On o
6 Post
7 VESA mount
8 HDMI / DP / AUD out + DC inputs
9 Panel
ASSEMBLY
1. Install the post in the rear of the screen, you will
hear a click when it´s in place.
2. Use the provided screw to install the base to the
post.(We advice to do this step with the screen
facing down in a at surface.)
INSTALLATION
1. Connect the Displayport or HDMI cable of your
computer to the corresponding port on the back
of the monitor (8).
1. Connect the power supply cable to the monitor.
2. On: Press universal buon (5) to turn on your
monitor.
3. O: Press universal buon (5) to turn o your
monitor.
4. When the monitor is operating under normal
conditions, the LED indicator light will be green
(or blue); If the monitor is in saving mode,
the LED indicator light will be red. When the
power indicator is o it means that the monitor is
in power o mode. Please disconnect the power
cable when the monitor is not being used.