GameFactor MG300 User Manual

ENGLISH
INSTRUCTIONS FOR USE
1. Turn on your monitor (your monitor must be
receiving a signal to enter the setup menu).
2. Press the menu buon (1) located on the back of
your monitor.
3. Press the menu buon (2/3) up and down to
switch between the options shown.
4. To select the desired option to configure, select
it with the universal buon (1) and navigate
through the menu with the buon.
5. If you wish to go back from the previously selected
submenu, press the universal buon (1).
Seings Menu
Press Menu in the main menu, select MENU.
Press up and down to change the main menu image
to change.
Press Menu to change submenu seings, and press up
and down in the menu.
Press up and down to adjust the seings.
Press AUTO to return to the main menu.
TECHNICAL SPECS
Mounting Support 75 x 75 mm
Aspect ratio 16:9
Viewing Angle H: 170°
Viewing Angle V: 160°
Backlight type: LED
Maximum resolution: 1920 x 1080
Colors: 16.7 millons
Refresh rate: 75Hz
Contrast ratio: 1000:1 (Normal) , 5000000:1
(Dynamic)
Brightness: 250 cd/m²
Response time: 5 ms
Connections: 1x HDMI, 1x DisplayPort
Inclination angle: -5º to +15º
Panel type: TN
Dimensions: 560 x 50 x 330 mm
Size: 24.5”
Input voltage: 12 V ¤ 4.0 A MAX
Energy consumption: 25 W
Standby mode: 1 W

GameFactor MG300 Specifications

General

Brand	GameFactor
Model	MG300
Category	Monitor
Language	English