GameFactor MG500V2 - OPERATING INSTRUCTIONS; DATA SHEET

1514
INSTRUCTIONS FOR USE
1. Turn on your monitor (your monitor must be
receiving a signal to enter the setup menu).
2. Press the menu buon on the back of your monitor.
3. Press the up and down buons to toggle between
the displayed options.
4. To select the desired option to configure, select it
with the menu buon and navigate through the
menu with the buons.
5. If you want to go back from the previously selected
submenu press the auto buon.
Seings Menu
1. Press Menu from the main menu, select MENU.
2. Press + or - to change between seings.
3. Press Menu to change the submenu seings, and
press + or - on the menu.
4. Press + or - to adjust the seings.
5. Press AUTO to return to the main menu.
DATA SHEET
Wall mount: VESA mount
Aspect ratio: 16: 9
Viewing angle H: 178 °
Viewing angle V: 178 °
Lighting type: LED
Maximum
resolution:
1920x1080
Colors: 16.7 million
Refresh rate 144 Hz
Contrast ratio: 1000: 1 (Normal), 5000000: 1
(Dynamic)
Brightness: 250 cd / m²
Response time: 1 ms
Connections: 1x HDMI, 1x DisplayPort
Inclination angle: -5º to + 15º
Panel type: TN
Dimensions: 521.28x 293.22 mm
Size: 23.8 "