GameSir T4 pro - Back Buttons Programming; Single Button or Multiple Buttons Can Be Set

13
BACK BUTTONS PROGRAMMING
SINGLE BUTTON OR MULTIPLE BUTTONS CAN BE SET
Turbo mode
How to start
Description
Indicator tips
Triggered at
the same time
Any M button + SELECT
1. In Switch mode,
combination key
programming is not
supported, only single
key programming is
supported.
(In Apple Mac Mode,
back buttons
programming is not
supported.)
E.g.:
1. M1 + SELECT
enters the Same
Trigger
programming
mode
2. Press and hold
the button you
want to program.
3. Press and hold
the LB and R3
4. Press M1 again
to confirm.
5. Press M1 to
enable the LB and
R3 to be triggered
simultaneously
The red and blue
lights of the right
joystick backlight
circle are stay om
at the same time,
which means
entering the
programming
mode. The blue
light of the right
joystick backlight
circle is stay on,
which means the
programming is
completed.
Triggered in
sequence
Any M button + START
1. In Switch mode,
combination key
programming is not
supported, only single
key programming is
supported.
(In Apple Mac Mode,
back buttons
programming is not
supported.)
E.g.:
1. M1 + START
enters the
Sequential Trigger
programming
mode
2. Press and hold
the button you
want to program.
3. Press and hold
the LB first and
then Press and hold
the R3
4. Press M1 again
to confirm.
5. Press M1 to
enable the LB and
R3 to be triggered
in sequence
The red and blue
lights of the right
joystick backlight
circle are stay om
at the same time,
which means
entering the
programming
mode. The blue
light of the right
joystick backlight
circle is stay on,
which means the
programming is
completed.