Gamewell GF510 Series

Need help?

Do you have a question about the Gamewell GF510 Series and is the answer not in the manual?

Summary

Fire Alarm System Limitations

System Limitations Overview

Discusses limitations of fire alarm systems, including detectors and audible warnings.

Regulatory Standards

NFPA and UL Compliance

Lists relevant NFPA and UL standards for system installation and compliance.

Product Description

Product Features and Overview

Highlights key features, technical specs, and main components of the GF505/GF510 panels.

System Interfaces and Modules

Describes Digital Communicator, telephone needs, and optional modules.

Installation

System Mounting and Power

Covers backbox mounting, operating power, and power-limited wiring requirements.

Circuitry and Module Installation

Explains input/output circuits, communicator, and optional module installation.

Programming

Programming Levels and Initial Setup

Explains user/master programming, initial power-up, passwords, and screen navigation.

Core Configuration Options

Covers programming for input zones, NACs, relays, system setup, and timers.

Module and Communication Configuration

Details ANN-BUS, DACT, and central station communication programming.

History, Walktest, and Maintenance

Explains history management, walktesting, password changes, and maintenance level access.

Operating Instructions

Panel Controls and Status Indicators

Explains panel buttons, LEDs, normal, trouble, alarm, and supervisory operations.

System Operations and Timers

Details disable/enable, waterflow, detector functions, coded operation, presignal, PAS, and system timers.

Walktest and Status Viewing

Covers walktest procedures, reading status of zones, NACs, relays, system settings, and communication.

Central Station and Phone Line Status

Allows viewing central station reporting status and phone line configuration.

Central Station Communications

Transmittal Priorities and Compatibility

Lists event priorities and compatible UL listed receivers for central station reporting.

Power Supply Calculations

AC Branch Circuit and System Current Draw

Details calculating AC branch circuit current and total system current draw.

Battery Size Calculation

Guides through calculating total standby and alarm load for battery size.

Appendix A: Ademco Contact ID Format

Ademco Contact ID Transmission and Printout

Describes the data transmission format and provides a typical printout example.

Appendix B: NFPA Standard-Specific Requirements

NFPA 72 Compliance Requirements

Lists components needed for NFPA 72 Central Station, Auxiliary, and Proprietary systems.

Appendix C: FACP with Keltron

FACP Keltron Module Connections

Illustrates connections between the FACP and Keltron Receiver/Transmitter modules.

Limited Warranty

Limited Warranty Details

Outlines manufacturer's warranty terms, limitations, and exclusions.