To Next PageTo Next Page
Need help?Do you have a question about the Gamewell IDENTIFLEX 632 and is the answer not in the manual?
Provides an overview of the Identiflex 632 Fire Alarm Control Panel and its firmware.
Highlights enhancements and new capabilities in firmware version r7.
Explains the panel's functionality for controlling fire suppression releasing sequences.
A technical overview of the IF632 Analog/Addressable microprocessor-based fire alarm panel.
Describes the system's flexible building block design approach for customization.
Explains the unique initialization process for system configuration and data storage.
Details the modules that comprise the common control section of the panel.
Describes the main user interface, including display, LEDs, and switches.
Explains the circuitry interfacing the CPU and various system modules.
Provides four Form C common relay outputs for auxiliary functions.
Contains system firmware, memory, and communication interface capabilities.
Monitors and controls analog addressable devices across multiple circuits.
Modules for monitoring conventional detectors and contact-type devices.
Multi-function output modules for signaling circuits and appliance control.
Modules providing programmable Form C relays for control functions.
Modules designed for On/Auto/Off control of building systems.
Provides additional reverse polarity city tie circuits for control.
Explains the main control panel display, keys, and indicators.
Details the different states the system can be in (Default, Normal, Alarm).
Step-by-step instructions for acknowledging alarms, silencing, and resetting.
Description of the system's physical cabinet structure and dimensions.
Procedures for assembling system hardware and installing modules.
Guidance on identifying and placing system modules within cabinet bays.
Specifications and details of the main power supply unit.
Specifications and details of the auxiliary power supply unit.
General access and navigation within the system's test modes.
Procedure for performing an automatic system test of devices.
How to remove devices or circuits from system service temporarily.
Testing individual input circuit cards and monitoring for circuit noise.
Testing the interaction between input circuits and output circuits.
Overview of the SmartStart programming process and system configuration.
Instructions for initial system power-up and setup procedures.
Details on managing system access levels and passwords.
Navigating the main menus for system configuration and parameter changes.
Explanations of the meaning of various fields shown during programming.
Process for selecting specific devices for programming changes.
Creating logic to connect input devices to output devices or circuits.
Accessing system menus for configuration, display, and download.
Using a computer for system monitoring, control, and programming functions.
Configuration steps required for using PROCOMM for system communication.
Remote monitoring of system status and control commands via computer.
A comprehensive list of system event messages and their descriptions.
Details the structure and format of configuration files for the F-600 system.
Explanations of card addresses, IDs, and associated variable definitions.
A guide for calculating the required battery capacity for the system.
General| Brand | Gamewell |
|---|---|
| Model | IDENTIFLEX 632 |
| Category | Fire Alarms |
| Language | English |
