To Next PageTo Next Page
Need help?Do you have a question about the Gamewell Flex 4 and is the answer not in the manual?
Details the capabilities and configurations of the Flex 4 and Flex 8 Fire Alarm Control Panels.
Lists and describes the different models of Fire Alarm Control Panels and optional modules.
Details optional accessories such as remote annunciators and resistors.
Specifies the required battery models and capacities for the system.
Configuration details for the main fire alarm control panel, including jumpers and DIP switches.
Configuration settings for the CEM module, including Class A/B selection and DIP switches.
Details on configuring RY4/RY8 relay modules, including jumper settings for control.
Configuration notes for the DACT module, including jumper removal and compatibility.
Configuration notes for the PRM module, including jumper cutting and compatibility.
Best practices for dressing field wires to prevent stress on connections and conduit runs.
Detailed terminal connections for the main fire alarm board, including circuit types and power ratings.
Wiring diagrams and terminal connections for the CEM module, covering initiating and indicating circuits.
Terminal connections for RY4 and RY8 relay modules, detailing relay contacts and load ratings.
Terminal connections for the PRM module, including city tie, polarity reversal, and protective device requirements.
Diagram and instructions for connecting the main power supply and batteries to the fire alarm panel.
Tables detailing maximum wiring runs and loop resistance for initiating and indicating circuits.
Pre-power-up checklist for modules, wiring, jumpers, and grounding.
Step-by-step guide for powering up the fire alarm control panel after checkout.
Diagnosing common circuit, remote, ground, and battery troubles with the system.
Description of all panel LEDs, including status, alarm, trouble, and supervisory indicators.
Explanation of panel switches like System Reset, Signal Silence, Fire Drill, and Auxiliary Disconnect.
Details on how the panel responds to alarms, subsequent alarms, and system events.
Defines Initiating (Non-Verified, Verified, Water-Flow, Supervisory) and Indicating (Audible/Visual) circuit types.
General| Brand | Gamewell |
|---|---|
| Model | Flex 4 |
| Category | Fire Alarms |
| Language | English |
