To Next PageTo Next Page
Need help?Do you have a question about the Gamewell IF632 and is the answer not in the manual?
Key safety, environmental, and installation guidelines for system operation and setup.
Guidelines for proper wiring, system survivability, and ongoing maintenance procedures.
Procedures for system re-acceptance testing and other important operational considerations.
Details on inherent limitations of fire alarm systems and performance of detection devices.
Information on the effectiveness of warning devices and the importance of user awareness and training.
Overview of the FPT Gateway's function and basic network installation concepts.
Details on agency listings and compliance with relevant industry standards.
Regulatory agencies and standards for product installation.
Information regarding retrofit applications and required environmental operating conditions.
List of supplementary documentation resources for the FocalPoint system.
Critical warnings and a list of all required equipment for FPT Gateway installation.
General overview of the installation process and layout of the gateway PC board.
Step-by-step instructions for mounting the gateway cabinet to the wall.
Procedure for mounting gateway components and essential electrostatic discharge precautions.
Connecting Ethernet and serial cables for the gateway to the network and panels.
Details on serial cable connections for Gamewell and FCI panels.
Configuration for serial data connections to 600 Series routers and panels.
Serial cable connection details for FCI E3 and 7100/7200 panels.
Specifications for power supply and instructions for connecting power to the gateway.
Important notes and technical specifications for RS232 and Ethernet wiring.
Procedure for selecting the default FPT Gateway within the FocalPoint system.
Steps to configure the IP address for the FPT Gateway.
Configuring panel settings and mapping nodes within the FocalPoint system.
Procedure for setting the SNTP server address for time synchronization.
Setting the time zone, GMT offset, and Daylight Saving Time parameters.
Steps to change the default gateway login password for security.
Alternative steps to change the gateway IP address via a web browser.
Procedure to add an existing gateway to the FocalPoint Workstation.
Steps to create and configure a new network connection for a gateway.
Procedure for setting up and managing Gamewell panel groups on the workstation.
Handling special events like connection interrupts and gateway power up scenarios.
Understanding the effects of correct and incorrect node mapping on system events.
List and description of common commands for Gamewell/FCI devices.
Codes appended to point IDs for off-normal events in FCI systems.
Using SmartProgram II to define points and ensure correct workstation icon display.
Introduction to the config tool and descriptions of various configuration fields.
Detailed settings for time zone, GMT offset, and Daylight Saving Time.
Details on panel properties and descriptions of the config tool's menu options.
Information on manufacturer warranties, limitations, and the process for warranty claims.
General| Manufacturer | Gamewell-FCI |
|---|---|
| Model | IF632 |
| Communication | Ethernet |
| Power Supply | 24 VDC |
| Product Type | Gateway |
| Compatibility | Gamewell-FCI fire alarm control panels |
| Capacity | Connects up to 32 E3 Series panels |
