13
PATHFINDER AWL
Once the awl is inserted, pull the handle of the awl outward while holding the tip section in
place. This leaves the outer sheath in the grommet hole. Insert the end of the string into the
outer sheath. While holding the string, slowly pull the sheath out of the grommet hole to leave
the free end of the string exposed
The machine includes the pathfi nder string-
ing awl which creates a pathway between or
around strings to make inserting a string through
blocked grommets easier and quicker.
Insert the awl through the grommet hole in
the same manner as for traditional awls. The
pathfi nder awl must be in the closed position
before insertion.
Locking the Turntable
The turntable may be locked in any position.
Rotate the lever down to lock the turntable
and up to release the turntable.
ADDITIONAL FEATURES
To Next Page
Loading...
