1. Introduction and Setup
Unpacking and In the Box
Thank you for choosing our TX5 Spot moving head light. For your own safety, please read
this manual before installing or using the device. This manual covers the important
information on installation and applications. Please install and operate the fixture with
following instructions. Meanwhile, please keep this manual for future needs.
The TX5 is made of a new type of high temperature strength plastic and cast aluminum
casing. The fixture is designed and manufactured strictly following CE standards,
complying with international standard DMX512 protocol. It’s independently controllable
and link-able with other lights for operation. And it is applicable for large-scale live
performances, theater, studio, nightclubs, houses of worship, and more.
The TX5 features high brightness and stability. Please carefully unpack it when you receive
the fixture and check for any damages from shipping. And please check whether the
following items are included inside the box:
•
• TX-5 250w Moving Head – 1
• DMX Signal Cable – 1
• Power Cable – 1
• Omega Clamps – 2
• User Manual - 1
TX5 Spot – GAMMA LED Vision
Page 3 of 21
To Next Page
Loading...
