Need help?Do you have a question about the Gamma X-Stringer XLT and is the answer not in the manual?
General| Type | Stringing Machine |
|---|---|
| Function | Racquet Stringing |
| Mounting System | 6-Point |
| Compatibility | Tennis, Squash, Badminton |
| Material | Aluminum and steel |
| Stringing Speed | Manual |
Lists key features of the stringing machine.
Instructions for installing the leg bracket and rubber foot pads.
Steps for attaching the leg bracket to the machine base.
Install remaining foot pads and the tool tray onto the machine base.
Identifies key components on the front and back panels.
Guides on connecting the power cord and foot pedal switch.
Details tension index buttons and LED displays for settings.
Explains Clear, Test, Memory, Enter, Knot, and Speed buttons.
Describes the pre-stretch feature for string tension.
Guides on cleaning and greasing string clamp posts and tubes.
Positioning and locking frame support posts for racquet mounting.
Snugging frame support slides against the racquet.
Adjusting shoulder supports for flush contact with the frame.
How to lock and release the string clamp base on the turntable.
Details how to clamp a string with the dual-action clamps.
Initial steps of threading strings through the frame grommets.
Guides on wrapping string and using controls to apply tension.
How to release string tension using controls or foot pedal.
Securing tensioned main strings and following manufacturer recommendations.
How to weave cross strings, alternating weave direction.
Tying off, removing the frame from the mounting system.
How to engage and release the turntable brake.
Installing protection pads for badminton shoulder supports.
Instructions for using the pathfinder awl to create pathways for strings.
Steps to calibrate the machine's tension accuracy using a calibrator.
How to enable or disable the machine's buzzer feedback.
Adjusting clamp jaw gap for different string types and pressures.
Adjusting the locking nut for smooth clamp base operation.
Steps to remove clamp bases for maintenance or cleaning.
Solutions for strings slipping in clamps or gripper.
Solutions for clamp base slipping on turntable.
Troubleshooting electrical issues and tension accuracy.
Advice on cleaning clamping surfaces with stones, alcohol, or toothbrush.
List of numbered components for the stringing machine.
List of tools and optional accessories for the machine.
Visual diagram showing numbered parts of the stringing machine.
To Next Page